* Add warning to mailer documentation about authentication
References #7966
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @guillep2k and @mrsdizzie
* as per @mrsdizzie
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
GH has different HardBreaks behaviour for markdown comments and documents.
Comments have hard breaks and documents have soft breaks - therefore Gitea's rendering will always be different from GH's if we only provide one setting.
Here we split the setting in to two - one for documents and one for comments and other things.
Signed-off-by: Andrew Thornton art27@cantab.net
Changes to index.js as per @silverwind
Co-authored-by: silverwind <me@silverwind.io>
Changes to docs as per @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Switch code editor to Monaco
This switches out CodeMirror for Monaco which is based on the same code
base as VS code and should work pretty similar to it.
It does add a few async chunks, totalling around 10MB to our build. It
currently supports around 65 languages and in the default configuration,
each language would emit one ugly [number].js chunk, so I opted to
combine them all into a single file for now.
CodeMirror is still being used under the hood by SimpleMDE so it can not
be removed yet.
* inline editorconfig, fix diff, use for markdown, remove more dead code
* refactors, remove jquery usage
* use tab_width
* fix intellisense
* rename function for clarity
* misc tweaks, enable webpack progress display
* only use --progress on dev build
* remove useless borders in arc-green
* fix typo
* remove obsolete comment
* small refactor
* fix file creation and various refactors
* unset useTabStops too when no editorconfig
* small refactor
* disable webpack's [big] warnings
* remove useless await
* fix dark theme check
* rename chunk to 'monaco'
* add to .gitignore and delete webpack dest before build
* increase editor height
* support more editorconfig properties
* remove empty element filter
* rename
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
In #9888, it was reported that my earlier pull request #9075 didn't quite function as expected. I was quite hopeful the `ValuesWithShadow()` worked as expected (and, I thought my testing showed it did) but I guess not. @zeripath proposed an alternative syntax which I like:
```ini
[markup.sanitizer.1]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
[markup.sanitizer.2]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
```
This was quite easy to adopt into the existing code. I've done so in a semi-backwards-compatible manner:
- The value from `.Value()` is used for each element.
- We parse `[markup.sanitizer]` and all `[markup.sanitizer.*]` sections and add them as rules.
This means that existing configs will load one rule (not all rules). It also means people can use string identifiers (`[markup.sanitiser.KaTeX]`) if they prefer, instead of numbered ones.
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (😄)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use AJAX for notifications table
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move to separate js
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate golangci-lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add autoupdating notification count
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix wipeall
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hide and hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More auto-update improvements
Only run checker on pages that have a count
Change starting checker to 10s with a back-off to 60s if there is no change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* string comparison!
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add configurability as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add documentation as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use CSRF header not query
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Further JS improvements
Fix @etzelia update notification table request
Fix @silverwind comments
Co-Authored-By: silverwind <me@silverwind.io>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify the notification count fns
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Some OAuth2 providers return quite large structured tokens >32767 bytes.
Gitea currently has a fixed maximum of 32767 bytes for these and
unfortunately due to the convoluted nature of the dependent libraries the
error returned is rather opaque.
Here we manage the error a little better - detecting the rather opaque
github.com/gorilla/securecookie.errEncodedValueTooLong and converting
it to a more readable error.
Further we provide a configurable option to increase the maximum size of
the provided OAuth2 tokens.
Fix#9907
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Across several files, references to cron.update_migration_post_id are made, although the actual setting is called cron.update_migration_poster_id according to modules/setting/cron.go (10e2f29144/modules/setting/cron.go (L54)).
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Add more logging in the LFS server
Adds more logging in the LFS server and stops sending internal server
error information to the client
* Add LFS Lock cursor implementation
* Simplify Claims in LFS and remove the float64 casts
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Prevent Firefox from using apple-touch-icon
The opaque background does not work well in Firefox which uses the icon
as a "rich icon". Prevent this by not specifying it in HTML. Real Apple
devices will still request the icon on the static path.
Fixes: https://github.com/go-gitea/gitea/issues/10394
Also adjust gitignore so app.ini.sample becomes searchable and fixed a
variable name in app.ini.sample.
* fix gitignore
* Cache last commit to accelerate the repository directory page visit
* Default use default cache configuration
* add tests for last commit cache
* Simplify last commit cache
* Revert Enabled back
* Change the last commit cache default ttl to 8760h
* Fix test
* Add support for database schema
* Require setting search_path for the db user
* Add schema setting to admin/config.tmpl
* Use a schema different from default for psql tests
* Update postgres scripts to use custom schema
* Update to xorm/core 0.7.3 and xorm/xorm c37aff9b3a
* Fix migration test
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Make CertFile and KeyFile relative to CustomPath
The current code will absolute CertFile and KeyFile against the current working directory. This is quite unexpected for users. This code makes relative paths absolute against the CustomPath.
Fix#4196
* Improve error reporting when reading certificates
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add possibility to global disable repo units.
* Add Default Repo Unit app.ini setting.
* Hide units
* Hide disabled repo units
* Minor fixes
* Indicate disabled units in team settings.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add USE_SERVICE_WORKER setting
This will be very useful setting for anyone doing frontend work.
Fixes: https://github.com/go-gitea/gitea/issues/9044
* prevent potential syntax error on old browsers
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
* Add retry for migration http/https requests
* give the more suitable name for retry configuraion items
* fix docs and lint
* Only use retryDownloader when setting > 1
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
* in progress changes for #7405, added ability to add cross-repo dependencies
* removed unused repolink var
* fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes
* reverted removal of string in local files becasue these are done via crowdin, not updated manually
* removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review
* changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result
* simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository
* made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line)
* replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard
* some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies
* added Name to the RepositoryMeta struct
* updated swagger doc
* fixed total count for link header on SearchIssues
* fixed indentation
* fixed aligment of remove icon on dependencies in issue sidebar
* removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block)
* reverting .css change, somehow missed or forgot that less is used
* updated less file and generated css; updated sidebar template with styles to line up delete and issue index
* added ordering to the blocked by/depends on queries
* fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository)
* re-applied my swagger changes after merge
* fixed split string condition in issue search
* changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter
* when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled
* updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here
* fixed incorrect setting of user id parameter in search repos call
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd181dbb8b139808b9be623470d4f0e40f
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
This PR fixes#7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however.
## Features
- [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.)
- [x] Verify commits signed with the default gpg as valid
- [x] Signer, Committer and Author can all be different
- [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon.
- [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available
- Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg
- [x] Try to match the default key with a user on gitea - this is done at verification time
- [x] Make things configurable?
- app.ini configuration done
- [x] when checking commits are signed need to check if they're actually verifiable too
- [x] Add documentation
I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
* Prevent deadlock in indexer initialisation during graceful restart
* Move from gracehttp to our own service to add graceful ssh
* Add timeout for start of indexers and make hammer time configurable
* Fix issue with re-initialization in indexer during tests
* move the code to detect use of closed to graceful
* Handle logs gracefully - add a pid suffix just before restart
* Move to using a cond and a holder for indexers
* use time.Since
* Add some comments and attribution
* update modules.txt
* Use zero to disable timeout
* Move RestartProcess to its own file
* Add cleanup routine
* Update app.ini.sample
Give further information on hyperlink rendering in Markdown
* Update app.ini.sample
Follow feedback from @guillep2k for CUSTOM_URL in markdown to indicate http and https are always rendered as links.
* Update custom/conf/app.ini.sample
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Update custom/conf/app.ini.sample
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
Add password complexity checks. The default settings require a lowercase, uppercase, number and a special character within passwords.
Co-Authored-By: T-M-A <maxim.tkachenko@gmail.com>
Co-Authored-By: Lanre Adelowo <adelowomailbox@gmail.com>
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-Authored-By: Lauris BH <lauris@nix.lv>
zeripath
silverwind
Alexander Scheel
mrsdizzie
Kristian Antonsen
John Olheiser
Lunny Xiao
guillep2k
David Svantesson
Timon Engelke
rektide
Brad Albright
John Olheiser
6543
Jakob Ackermann
Benson Muite
Maxim Tkachenko